Showing posts with label Trail. Show all posts
Showing posts with label Trail. Show all posts

2011 Kawasaki KX250F


Kawasaki has updated its KX250F for 2011 with fuel injection and a radical new front fork.

The 2011 Kawasaki KX250F uses a new Separate Function Fork system from Showa that splits spring and damping functions between each leg. According to Kawasaki, the Separate Function Fork reduces friction by 25%, lowers weight and is easier to adjust than conventional forks.

Continue Reading ... 2011 Kawasaki KX250F

Roxon P-ONE 12/15 Specification



Model: Roxon P-ONE 12/15
Year: 2005
Category: Minibike, cross
Rating: 59.7 out of 100.

Engine and transmission
Displacement: 49.00 ccm (2.99 cubic inches)
Engine type: Single cylinder
Stroke: 2
Power: 6.50 HP (4.7 kW)) @ 6000 RPM
Fuel system: Carburettor. Dell´Ortho SHA 14/12
Starter: Kick
Cooling system: Air
Gearbox: Automatic

Physical measures
Dry weight: 46.0 kg (101.4 pounds)
Seat height: 760 mm (29.9 inches) If adjustable, lowest setting.
Overall length: 1,280 mm (50.4 inches)

Chassis and dimensions
Front brakes: Single disc
Front brakes diameter: 90 mm (3.5 inches)
Rear brakes: Expanding brake (drum brake)

Speed and acceleration
Power/weight ratio: 0.1413 HP/kg

Other specifications
Fuel capacity: 2.20 litres (0.58 gallons)
Comments: Intended for children 6-12 years.

Honda GL Pro Diubah Jadi Trail



Susah memang kalau sudah jadi trail-mania. Makanya, kala bengkel modifikasi Gandul 2Wheel Custom (G2WC) menyodorkan desain Aprilia SMV 750, Helmy Hermansyah kontan setuju Honda GL Pro Neo Tech miliknya diubah seperti itu. Sebelumnya, warga yang tinggal di kompleks Marinir Rangkapan Jaya Baru, Depok, ini sudah punya Suzuki TS125 yang dirombak jadi trail RM125.

Wardoyo dari G2WC mengaku diberi kebebasan merombak motor jadi supermoto dan pilihan yang pas SMV 750. Meski konsep yang diaplikasi tidak mirip sekali, ia berupaya mendekati kesamaan. Hal itu seperti tampak pada bagian rangka tengah yang dibentuk dari pipa seamless ukuran 1/2 inci yang dibuat menyilang.

"Sasis tengah mengapit tangki sekaligus bodi tengah yang dibuat dari pelat," ujar Wardoyo. Menurutnya, rangka pipa ini juga dibuat untuk menopang bodi belakang (terbuat dari pelat yang menyatu dengan sepatbor).

Untuk suspensi, bagian itu tentu mengikuti tren global dengan menggunakan sistem monoshock. Hanya, Wardoyo tidak mengikuti model SMV 750 yang ada di bagian kanan rangka. Di sini, ia menempatkannya persis di tengah biar nyaman lantaran dipakai harian.

Mengenai kaki-kaki, Wardoyo sedikit harus kerja keras lantaran pemilik masih ingin pakai shock bawaan standar untuk yang depan. Solusinya, ditambah adaptor besi agar tampilan tambah tinggi. Lalu, bagian tengahnya dikasih karet shock Suzuki TS agar lebih berisi.

Begitu lengan ayun, minimal lebih tebal dari aslinya. Caranya, yang asli diberi kondom yang menggunakan pelat. Pada bagian tengah diberi lekukan agar mirip dengan arm Aprilia. Hasilnya, meski tanpa komponen limbah, tampilannya boleh juga. (Belo)

Sumber : kompas

2009 Yamaha YZ250F



Ask any motocross rider where races are won and lost and odds on he’ll tell you its all in the corners. A light, nimble and supreme handling MX bike can pick its lines and stick to them, enabling its rider to hang on longer and go harder.

So it’s no surprise to learn that cornering performance was the guiding theme throughout the development of the new model YZ250F.

The next generation motocross development plan was hatched with rider involvement paramount. Trackside customer research led Yamaha engineers to discover that what riders wanted more than anything else was sharp handling. Riders of all abilities from pros right down to swappers. And by handling, they meant better cornering performance. Because a better handling bike lets a rider get on the gas sooner, is less tiring to ride and is the key to winning motocross races.

The development team’s goal was to make quick cornering easy for riders of all skill levels. Not a simple task and certainly not something that could be achieved with small tweaks to the chassis or engine. The goal could only be reached by applying a highly innovative and synergistic approach to the science of motorcycle cornering.

The engineers were well aware that the 250 is not just a smaller displacement version of the 450, but a unique machine in its own right. So the task was to design a stand alone 250, not a scaled down 450cc MX bike.

By making a specific 250cc machine, the chassis can be tailored to deliver the handling response suitable for the class. The engine character of the 250 can then be tuned to suit that chassis. And by starting from a clean sheet of paper, not only was the goal of enhanced cornering performance met, the machine’s overall performance was dramatically improved.

The new YZ250F is compact, lightweight and requires little input for rider balance. Which means it’s less tiring to ride. The credit for this goes to the all new Bilateral Beam aluminium frame which features high lateral and torsional rigidity and offers a stable feel and precise handling.

The new frame converts sideways shocks smoothly to longitudinal shocks that are more readily absorbable by suspension. This makes the YZ250F very stable when cornering, which means it’s easier to dive into corners with more speed.

By quantifying rider feedback, the chassis’ rigidity could be more precisely matched to the rider. Additionally, the new frame layout made it possible to change the shape of the fuel tank. By moving the tank towards the centre of the bike, mass centralisation was significantly advanced. Further improvements were made by moving the radiator rearward and mounting it lower.

Improvement to the initial damping quality of the front and rear suspension units have resulted in improved traction and give the rider a better feel for the terrain. This allows more confidence when entering a turn and lets the rider hold a line with less effort. The result is less rider fatigue during a long moto.

An engine built like a Swiss watch
After thorough research and testing, Yamaha engineers decided to retain Yamaha’s five titanium valve engine layout and FCR carburettor fuel delivery system. This combination was found to produce the best power output for the displacement while maintaining compact engine dimensions and light weight.

But the engine has been thoroughly refined for 2010 to result in even more punch. A higher lift intake camshaft, revised exhaust port and carb intake funnel shapes, new valve springs and retainers, smaller oil tank and revised ignition map for the CDI are just some of the many detail improvements that have been made to the 250cc powerplant. The new frame also allowed a reshaping of the air cleaner box which improves intake efficiency.

The result is a more rider-friendly engine with more linear power delivery. Low- and mid-range power characteristics and response are improved, giving the bike a lighter feel when cornering.

The changes were made possible in part by a measurement device used in MotoGP. This device allowed the engineers to quantify the transitional power characteristics when the rider begins to open the throttle after corner entry (1/4 – 1/2 throttle opening). Based on this data the engineers tuned the engine’s response characteristics to give the engine an ideal power feeling for the rider.

Another small but important change was to modify the clutch lever ratio so as to reduce the effort required at the lever. This makes it much easier for the rider to slip the clutch.

Dart styling hits the bullseye
The YZ250F’s straight frame-work directly expresses the lightweight feel and look a 250 should have. The plastic parts have been made as small as possible while still retaining their protective functions.

The bike’s lightness is further expressed by emphasising its linear imagery. The flatness of the tank, seat and rear fender also facilitates rider movement and the relationship between the handlebars, pegs and seat make for a natural and roomy riding position. The dart-like styling allows function to follow form, as the YZ250F’s elegant design contributes to its winning potential.

Honda GL-100 Supermoto



The first time the idea modification Honda GL-100 This is a long sebenernya've got something special yg yg others do not have hence the better the dirty daydream daydream gmn caranya & modification of this motor is a motor accident along memory lane motors used dmn dijadiin just adjacent to the old iron house .

Having asked around trus recommended follow-up mailing HOMO (honda_motor@yahoogroups.comAlamat e-mail address is being protected from spam bots, you need JavaScript enabled to view it) by friends trus poisoned by Heru top Hornet, it will be herded into ntu Corie motor for the upgrade Tigi components. Udah ok machine, tried to bandung ngadat also ok but not too embarrassed ngeliat lama2 motor show yg worse than the motor motorcycle taxi =)


From there began to daydream again Eke deh, initially self-front purchase of the second Tigi Ucok, nego sodomy only deal in HP trus H. Nawi and directly submitted to the motor Ucok (fortunately not ilang gw ntu new motor is a new meet & know each Ucok heheh ). Intention to genti front tomorrow instead tigi all pairs of rear disc .... then after dipake Temanggung TDG to taste the stern was still rocking klo dg nikung high speed, trus began changing tires in size 120/70 back modif all pake tank lid has like ninja.


Not long ago began to daydream again after Honda Ape see picture at ww w.hondaheaven.or then dying monosok pairs (see attached).

No one is thinking this is the motor Babe2 very original condition is not considered that strolled the streets again ...
Now ...? hehehehehe .... yg whose eyes do not want to glance.

Ntah later going to be much less ntu yg sure that the motor bike is not gonna be sold for without the bike is not gonna see gw alm.nyokap before he breathed his breath last one.

BRgds/@deSoe

Hornet - 110

Nama Pemilik : AdeSoe

Alamat : Taman Ventura Indah II, Tanah Baru Depok

Data Modifikasi

Ban Depan : Mizzle Power VTX 100/80-17"

Ban Belakang : Bridgestone Battlax 120/70-17"

Velg Dpn - Blkng : 17x1.85" - 17x2.50"

Sok Depan : Yamaha Scorpio

Monosok : Suzuki Satria

Swing Arm Belakang : Yamaha Scorpio

Stabilizer swing arm :pakai sok mobil Toyota Kijang diposisi-kan dibawah mesin

Mesin : Bore Up s/d 200cc

Knalpot : Made in Dewek

Data Modifikator

Ucok Speed Specialties (HDC)

Jl.Kramat - Kampung Utan, Bintaro Telp : 0812-909 6608

2010 KTM 690 SMC



Razor-sharp Supermoto technology, in combination with state-of-the-art engine technology – the victorious 660 SMC has found a more than worthy successor in the 690 SMC. KTM has created an unequalled bike based on the new 690 Enduro that will live up to the toughest Supermoto demands and leave everyone else behind in more ways than one. Suitable for everyday riding, ample performance, striking appearance, 100?% “Ready to Race”!


2010 KTM 690 SMC – Specifications


Engine type Single cylinder, 4-stroke
Displacement 654 cc
Bore x stroke 102 / 80 mm (4.02 / 3.15″)
Performance (homologated) 46.3 kW / 7500 rpm
Max. torque 64 Nm / 6000 rpm
Compression ratio 11.8:1
Starter/Battery E-Starter / 12 V 8.6 Ah
Transmission 6 gears, dog clutch engagement
Fuel Mixture Generation Keihin EMS with EPT (Electr. Power Throttle)
Control 4 V / OHC with roller rocker levers
Lubrication Pressure lubrication with 2 oil pumps
Engine lubrication Motorex, fully synthetic, SAE 10W-60
Primary drive 36:79
Final drive 16:42
Cooling Liquid cooled
Clutch APTC slipper clutch, hydraulically operated
Ignition Keihin EMS

Frame Chromium-Molybdenum trellis frame, powder coated
Subframe Self-supporting plastics tank
Handlebar Aluminium, Ø 28 / 22 mm (1.10 / 0.87″), tapered
Front suspension WP USD Ø 48 mm (1.89″)
Rear suspension WP mono shock with Pro Lever Linkage
Suspension travel front/rear 275 / 265 mm (10.83 / 10.43″)
Front brake Brembo four piston, radially bolted caliper, brake disc Ø 320 mm (12.6″)
Rear brake Brembo single piston, floating caliper, brake disc Ø 240 mm (9.45″)
Rims, front/rear Spoked wheels with aluminium rims 3,5 x 17″; 5 x 17″
Tires, front/rear 120/70 ZR 17; 160/60 ZR 17
Chain X-ring chain 5/8 x 1/4″
Main silencer Stainless steel silencer with regulated catalytic converter
Steering head angle 63°
Trail 112 mm (4.41″)
Wheel base 1480 ± 15 mm (58.27 ± 0.59″)
Ground clearance (unloaded) 290 mm (11.42″)
Seat height 900 mm (35.43″)
Tank capacity approx. 12 liters (3.17 gal) / 2.5 Litre Reserve (0.66 gal)
Weight (no fuel) approx. 139.5 kg (305.4 lbs)





660 smc, aluminium rims, art engine, brake disc, caliper brake, dog clutch, engine lubrication, frame powder, fuel mixture, head angle, KTM, KTM 690 SMC, max torque, oil pumps, pressure lubrication, sae 10w, spoked wheels, starter battery, striking appearance, suspension wp

2010 KTM 85SX



The 2010 KTM 85SX has long been the benchmark in its class. The KTM engineers have once again exceeded themselves improving this almost perfect bike even further. Be it power, chassis or quality – the 2010 KTM 85SX is a contender which strikes fear into your opponents.


KTM, KTM 85SX

2010 KTM 65SX

2010 KTM 65SX

2010 KTM 65SX - Front Angle View

A small engine with cutting-edge technology – the 2010 KTM 65SX gives you the confidence to take on larger bikes. Professional performance with superior two-stroke power. A professional chassis with a sturdy steel framework and light steel swingarm. Professional parts Wave brake discs, Marzocchi USD front fork and WP mono shock. This bike, designed for champions, was developed based on experience from over 160 world championship titles and can take whatever you throw at it. A real KTM bike, designed for winning.

2010 KTM 65SX - Left Side View

2010 KTM 65SX - Rear Side Top View

2010 KTM 65SX - Right Side View

2010 KTM 65SX - Trio View

KTM, KTM 65SX, ktm bike, light steel, professional performance, steel framework, stroke power, sturdy steel

2010 KTM 50SX Mini



Only the best power, performance and appearance are good enough for first place: the 2010 KTM 50SX Mini a winner for every ace from the ages of six to nine. The seat height is adjustable from 650 mm upwards, with long suspension travel, disk brakes at the front and rear, a chain guard, as well as the best power output available in this class.


chain guard, disk brakes, KTM, KTM 50SX, KTM 50SX Mini, power performance, suspension travel

2010 KTM 50SX



The 2010 KTM 50SX is the ultimate weapon for budding professional motocross racers. Its cutting-edge two-stroke technology provides unsurpassed power. The bike is easy to control with an automatic clutch for accelerating with ease. With its robust three-shaft engine, which avoids excessive wear on the clutch and water cooling, the 2010 KTM 50SX gives you an important edge over the competition in the heat of battle. Everything is kept under control thanks to the premium quality suspension components with huge amounts of suspension travel and the high-grade disc brakes.

2010 KTM 50SX - Left Side View


automatic clutch, disc brakes, KTM, KTM 50SX, motocross racers, quality suspension, stroke technology, suspension components, suspension travel, unsurpassed power

1984 Honda XL 250 R



Only Honda could make the XL 250 R. There's tradition. This is Honda's third distinct 250cc dual-purpose machine, following the 1984 XL 250R (the CB350 Twin engine with mildly revised frame, high pipes and not much speed in the dirt) and the original XL250 of 1984, a four-valve Single of great strength and weight.

More in the present are the resources offered by Honda's extended family. The XL-series Singles evolved in various displacements, gaining two-port exhausts and later compound carburetors, then single rear shocks, disc front brakes from the XR and CR lines, and radially disposed valves to take full advantage of the four ports.

This has been a true evolution. When things work, for example the disc front brake, they are parcelled out to the various model lines. When they don't, as in the 23-in. front wheel and the open loop frame with stressed engine, they are never heard from again.

This gives Honda an unmatched flexibility. Having developed the four-valve radial head with compound carbs, the frame, suspensions brakes, etc., Honda can then deal them out as the market demands.

General information
Model:Honda XL 250 R
Year:1984
Category:Enduro / offroad
Rating:71.6 out of 100. Show full rating and compare with other bikes
Safety:See our safety campaign with the high safety rated bikes in this category.
Engine and transmission
Displacement:249.00 ccm (15.19 cubic inches)
Engine type:Single cylinder
Stroke:4
Power:17.00 HP (12.4 kW)) @ 8000 RPM
Compression:10.2:1
Bore x stroke:75.0 x 56.5 mm (3.0 x 2.2 inches)
Valves per cylinder:4
Fuel control:OHC
Cooling system:Air
Gearbox:6-speed
Transmission type
final drive:
Chain
Physical measures
Weight incl. oil, gas, etc:131.0 kg (288.8 pounds)
Chassis and dimensions
Front tyre dimensions:3.00-21
Rear tyre dimensions:4.60-17
Front brakes:Expanding brake
Rear brakes:Expanding brake
Speed and acceleration
Top speed:110.0 km/h (68.4 mph)
Other specifications
Fuel capacity:9.00 litres (2.38 gallons)

Honda XR400R Specs (1997)



The following technical specification applies for 1997 Honda XR400R motocross series. Herein you will find detail information about the engine system, dimension, frame, drive train and electrical system. XR400R has a gasoline, air cooled 4-stroke SOHC engine with 397 cm² displacement. More information about this motocross, find it here.

DIMENSION

Overall length 2,130 mm (83.9 in)
Overall width 840 mm (33.1 in)
Overall height 1,240 mm (48.8 in)
Wheelbase 1,425 mm (56.1 in)
Ground clearance 310 mm (12.2 in)
Seat height 930 mm (36.6 in)
Curb weight 125 kg (276 lbs)
Dry weight 116.5 kg (257 lbs)
Max. weight capacity 100 kg (220 lbs)

FRAME

Frame type Semi-double cradle
Front suspension Telescopic fork
Front wheel travel 280 mm (11.0 in)
Rear suspension Swingarm
Rear wheel travel 300 mm (11.8 in)
Front tire size 80/100 – 21 51M
Rear tire size 110/100 – 18 64M
Tire brand (Dunlop) FR/RR K490G/K695
Front brake Hydraulic single disc
Rear brake Hydraulic single disc
Fuel capacity 9.5 lt (2.5 US gal)
Fuel reserve capacity 1.5 lt (0.4 US gal)
Caster angle 25º15′
Trail length 94 mm (3.7 in)
Fork oil capacity 280 cc (9.4 US oz)

ENGINE

Cylinder arrangement Gasoline, air cooled 4-stroke SOHC
Bore x stroke 85.0 x 70.0 mm ( 3.35 x 2.76 in)
Displacement 397 cm² (24.2 cu in)
Compression ratio 9.3 : 1
Valve train Silent multi-link chain driven SOHC with rocker arms
Intake valve opens at 1 mm lift 11º BTDC
Intake valve closes at 1 mm lift 41.5º ABDC
Exhaust valve opens at 1 mm lift 40º BBDC
Exhaust valve closes at 1 mm lift 10º ATDC
Lubrication system Forced pressure (dry sump)
Oil pump type Trochoid
Cooling system Air cooled
Air filtration Oiled polyurethane foam
Engine weight 38.5 kg (85 lbs)
Carburetor type Piston valve
Throttle bore 38 mm (1.5 in)

DRIVE TRAIN

Clutch system Multi-plate, wet
Clutch operation system Cable operating
Transmission 5 speeds
Primary reduction 2.826 (65/23)
Final reduction 3.000 (45/15)
Gear ratio:
1st 2.615 (34/13)
2nd 1.842 (35/19)
3rd 1.400 (28/20)
4th 1.120 (28/25)
5th 0.926 (25/27)
Gearshift pattern 1 – N – 2 – 3 – 4 – 5
Ignition CDI



specs xr400 1997, honda xr 400 r specification, xr400 chain size, 97 xr400 fork fluid, xr400r electric, xr400r tire sizes, wet weight of a honda xr400 1997, 1997 xr400 rear tire size, honda xr400 1997 bhp, 1997 honda xr 400 specs

2010 Husaberg FE390 Enduro



The 2010 Husaberg FE390 Enduro comes with fully adjustable 48 mm fork from WP Suspension has been further optimised to ensure even more responsive handling and provide high damping reserves. Combined with the increased 22 mm offset (previously 19 mm) of the CNC-machined triple clamps, this guarantees more reliable front wheel control.
2010 Husaberg FE390 Enduro - Front Side View


Engine
Engine type Single cylinder, 4-stroke
Displacement 393.3 mm
Bore / stroke 95 / 55.5 mm
Compression ratio 11.1 : 1
Starter / battery Electric starter / 12 V 7Ah
Transmission 6 gears
Fuel system Keihin EFI
Control 4 V / OHC with rocker levers
Lubrica tion Pressure lubrication with 2 oil pumps
Engine oil Motorex, SAE 10W-50
Primary ratio 33 : 76
Final drive 13 : 38 (13 : 52)
Cooling Liquid cooling
Clutch Wet multi-disc clutch, hydraulically operated
Engine management Keihin

Chassis
Frame Double cradle perimeter design 25CrMo4
Subframe Cross-linked Polyethylene
Handlebar Magura, Aluminium Ø 28 / 22 mm
Front suspension WP-USD Ø 48 mm
Rear suspension WP-PDS shock absorber
Susp. travel front / rear 300 / 335 mm
Front / rear brakes Disc brake Ø 260 / 220 mm
Front / rear rims 1.60 x 21″; 2.15 x 18″ DID
Front / rear tires 90 / 90-21″; 140 / 80-18″
Chain Chain 5/8 x 1/4″
Silencer Aluminium
Steering head angle 63.5°
Wheel base 1,475 +/– 10 mm
Ground clearance 390 mm
Seat height 985 mm
Tank capacity approx. 8.5 litres
Weight (ready to race) approx. 114 kg (without fuel)
2010 Husaberg FE390 Enduro - Front View

FE390 Enduro, Husaberg, Husaberg FE390 Enduro

2009 Honda CRF450X



In just a short time the CRF450X has grown immensely popular, and for good reason: Having won the grueling and world-renowned Baja 500 and Baja 1000 races multiple times, it has rightfully earned the title King of Baja.

Unique Features

* Electric-start system for easy starting in all conditions.
* Fuel-tank capacity is 1.9 gallons.
* Resettable, easy-to-read three-digit odometer.
* USDA-qualified muffler/spark arrester.
* Powerful 35-watt halogen headlight offers a wide range of illumination.
* LED taillight integrated into rear fender.
* Convenient sidestand integrated into left footpeg bracket can be easily removed for competition events.
* Wide-ratio five-speed transmission.
* Suspension and chassis tuned for competitive off-road riding needs.
* 18-inch rear wheel for greater flat-tire protection.
* T-ring-sealed chain is approximately 1.6mm narrower, and stronger compared with conventional chains.
* Skidplate and engine guards feature a unique three-piece design.

Engine/Drivetrain

* Powerful four-stroke 449cc liquid-cooled four-valve Unicam® engine is designed to produce power across a wide rpm band for off-road riding (see Technology Section).
* Electric starter drives the clutch side of the crankshaft to provide superior lubrication of starter gears and produce a narrow engine with a short, strong crankshaft.
* Compact, lightweight engine assembly weighs only 71 pounds.
* Lightweight titanium intake valves permit use of smaller valve springs, reducing overall engine height.
* Clutch cover and cylinder-head cover are made of magnesium to reduce engine weight.
* Forged 12.0:1-compression slipper piston is lighter than a conventional design, revving quickly while maintaining excellent cylinder sealing and high-rpm power.
* Nikasil cylinder lining is lightweight and provides cooler and quieter operation for extended engine life.
* 40mm Keihin FCR-type carburetor features four rollers on the flat slide, resulting in light throttle effort, smooth operation, crisp throttle response and excellent rideability.
* Carburetor features a Throttle Position Sensor (TPS) to help maintain linear throttle response throughout the rpm range.
* Twin-sump lubrication system separates the oil supply for the crankshaft, piston and valve train from the clutch and transmission. This ensures a cool supply of oil to the clutch, eliminates clutch and transmission material contamination of the engine oil, reduces the amount of circulating oil and permits the use of a smaller oil pump.
* Exhaust system uses a lightweight, stainless-steel exhaust header and muffler equipped with spark arrester.
* Dual radiators feature a refined core area for improved heat dissipation compared with conventional dual-radiator designs. Coolant recovery tank is located in front of the engine between the frame downtubes for improved center of gravity. Coolant tank is protected by a plastic skidplate.
* Gear-driven balancer reduces vibration and drives the water pump. Eight clutch plates provide the surface area necessary to handle the engine’s massive torque, while carefully matched clutch springs provide a light feel at the lever.
* Durable and versatile five-speed wide-ratio transmission.

Chassis/Suspension

* Fourth-generation Twin-Spar Aluminum Frame with forged-aluminum steering head (see Technology Section).
* HPSD features a compact damper attached to the upper triple clamp and the steering head to augment more aggressive steering characteristics and assist straight-line handling. Tuned specifically for higher speed, non-motocross, off-road riding applications, the CRF450X damper incorporates different valving/settings compared to the units on the motocross models. HPSD provides straight-line confidence at high speeds, a planted feel in corners, less rider fatigue and outstanding control over a wider variety of terrain and riding conditions.
* 18-inch rear wheel features same lightweight rear hub and HRC works-type lightweight-aluminum spoke nipples as used on CRF450R.
* Front wheel features large-diameter front axle and wide wheel-bearing span for excellent rigidity.
* 25mm rear-axle diameter and large-diameter bearings provide optimum rigidity to withstand torturous off-road conditions.
* Revised, sophisticated Inverted Twin-Chamber Cartridge Fork (see Technology Section).
* Pro-Link® Rear Suspension (see Technology Section) with new damper settings.
* Large 50mm-diameter rear shock damper piston for consistent performance under demanding riding conditions.
* Compact twin-piston front-brake caliper, anodized-aluminum brake pistons and lightweight front-brake disc minimize unsprung weight for improved turning and handling.
* HRC works-type rear brake system integrates the rear master cylinder and fluid reservoir, eliminating the need for a separate reservoir and hose assembly.

Additional Features

* Rider ergonomics are optimized by adapting the handlebar, seat and footpeg height to place the rider’s legs at the narrowest cross-section of the frame for improved comfort and handling feel.
* Rear-brake pedal and shift lever are made of lightweight aluminum and are designed to complement the riding position. Brake pedal features optimized ratio to match integrated rear-brake master-cylinder design.
* Wide, cleated, stainless steel footpegs are self-cleaning, resist corrosion, provide excellent grip and fold for extra ground clearance.
* Aluminum Renthal handlebar (971 bend) is rubber-mounted to help reduce rider fatigue and improve comfort.
* Handlebar holders provide two different mounting positions to match rider preference.
* Works-type handlebar grips add to rider comfort.
* Adjustable front-brake lever.
* Hot-start lever conveniently located on clutch perch.
* Quick-adjust clutch perch.
* Front disc brake cover helps protect rotor and caliper from damage.
* Removable rear subframe allows for easy maintenance.
* Comfortable, durable controls and high-quality fasteners.
* Stainless-steel clutch cable for long life.
* Honda Racing-inspired colors and graphics.
* When you buy a new Honda Powersports Product, you may be eligible to receive a complimentary one-year membership in the Honda Riders Club of America®, which includes an exclusive Members-only magazine, rider training benefits, access to the Members-only Clubhouse Web site and much more. Some limitations apply. For more information on the HRCA®, log on to hrca.honda.com.

Honda, Honda CRF450X